Data Structures

Here are the data structures with brief descriptions:

[detail level 12]

CBMP390_GpioConfig_t
CBMP390_press_calib_t	Raw pressure calibration coefficients
CBMP390_press_params_t	Scaled pressure calibration parameters
CBMP390_SpiConfig_t
CBMP390_t	BMP390 sensor instance
CBMP390_temp_calib_t	Raw temperature calibration coefficients (as read from sensor)
CBMP390_temp_params_t	Scaled temperature calibration parameters
CCommonBitErrors_t
C[struct].__unnamed0__
CFSM_Handle_t	FSM handle — holds the current and previous state of the machine
CFSM_Transition_t	A single row in the FSM transition table
CFsmErrors_t
C[struct].__unnamed0__
CICM20948_Data_t	ICM20948 interrupt and GPIO context
CICM20948_DmpMatrixEntry_t
CICM20948_RegAccelConfig2_t	ACCEL_CONFIG_2 register bit layout
C[struct].bits
CICM20948_RegAccelConfig_t	ACCEL_CONFIG register bit layout
C[struct].bits
CICM20948_RegBankSel_t	REG_BANK_SEL register bit layout
C[struct].bits
CICM20948_RegDmpIntStatus_t	DMP_INT_STATUS register bit layout
C[struct].bits
CICM20948_RegFifoCfg_t	FIFO_CFG register bit layout
C[struct].bits
CICM20948_RegFifoEn1_t	FIFO_EN_1 register bit layout
C[struct].bits
CICM20948_RegFifoEn2_t	FIFO_EN_2 register bit layout
C[struct].bits
CICM20948_RegFifoMode_t	FIFO_MODE register bit layout
C[struct].bits
CICM20948_RegFifoRst_t	FIFO_RST register bit layout
C[struct].bits
CICM20948_RegGyroConfig_t	GYRO_CONFIG_1 register bit layout
C[struct].bits
CICM20948_RegHwFixDisable_t	HW_FIX_DISABLE register bit layout
C[struct].bits
CICM20948_RegI2cCtrl_t	I2C_MST_CTRL register bit layout
C[struct].bits
CICM20948_RegI2cMstOdrConfig_t	I2C_MST_ODR_CONFIG register bit layout
C[struct].bits
CICM20948_RegI2cSlvAddr_t	I2C_SLVx_ADDR register bit layout
C[struct].bits
CICM20948_RegI2cSlvCtrl_t	I2C_SLVx_CTRL register bit layout
C[struct].bits
CICM20948_RegIntEnable2_t	INT_ENABLE_2 register bit layout
C[struct].bits
CICM20948_RegIntEnable_t	INT_ENABLE register bit layout
C[struct].bits
CICM20948_RegIntStatus_t	INT_STATUS register bit layout
C[struct].bits
CICM20948_RegLpConf_t	LP_CONFIG register bit layout
C[struct].bits
CICM20948_RegPwrMgmt1_t	PWR_MGMT_1 register bit layout
C[struct].bits
CICM20948_RegPwrMgmt2_t	PWR_MGMT_2 register bit layout
C[struct].bits
CICM20948_RegSingleFifoPrioritySel_t	SINGLE_FIFO_PRIORITY_SEL register bit layout
C[struct].bits
CICM20948_RegUserCtrl_t	USER_CTRL register bit layout
C[struct].bits
CICM20948_SensorData_t	Parsed sensor sample from the DMP FIFO
CICM20948_t	ICM20948 sensor instance
CSPP_Databank_t	Internal databank control structure
CSPP_GpioIsrCtx_t	Context passed to the GPIO ISR handler
CSPP_HALGpio_t	GPIO struct that contains all the pointers to the GPIO functions
CSPP_HalPort_t	Ports struct that contains all the pointers to the Ports functions
CSPP_HALSpi_t	SPI bus struct that contains all the pointers to the SPI functions
CSPP_HALStorage_t	Storage struct that contains all the pointers to the storage functions
CSPP_HALTime_t	Time struct that contains all the pointers to the Time functions
CSPP_HALUart_t	UART port struct that contains all the pointers to the UART functions
CSPP_Kpid_t
C[struct].bits
CSPP_SERVICE_ConsumerContract_t	Describes the contract of a consumer module. This module needs to have:
CSPP_SERVICE_ProducerContract_t	Describes the contract of a producer module. This module needs to have:
CSPP_SERVICES_PUBSUB_Consumer_t
CSPP_SERVICES_PUBSUB_Producer_t
CSPP_SpiInitCfg_t	SPI bus and device initialisation configuration