Go to the source code of this file.
Macros | |
| #define | SX1262_OPCODE_SET_STANDBY 0x80 |
| #define | SX1262_OPCODE_SET_TX 0x83 |
| #define | SX1262_OPCODE_SET_PACKET_TYPE 0x8A |
| #define | SX1262_OPCODE_SET_RF_FRECUENCY 0x86 |
| #define | SX1262_OPCODE_SET_PA_CONFIG 0x95 |
| #define | SX1262_OPCODE_SET_TX_PARAMS 0x8E |
| #define | SX1262_OPCODE_SET_BUFFER_BASE_ADDRESS 0x8F |
| #define | SX1262_OPCODE_WRITE_BUFFER 0x0E |
| #define | SX1262_OPCODE_SET_MODULATION_PARAMS 0x8B |
| #define | SX1262_OPCODE_SET_PACKET_PARAMS 0x8C |
| #define | SX1262_OPCODE_SET_DIO_IRQ_PARAMS 0x08 |
| #define | SX1262_OPCODE_CLEAR_IRQ_STATUS 0x02 |
| #define | SX1262_OPCODE_CALIBRATE_IMAGE 0x98 |
| #define | SX1262_BUSY_PIN 4 |
| #define | SX126X_DIO1_PIN 5 |
| #define SX1262_OPCODE_SET_STANDBY 0x80 |
Definition at line 12 of file sx1262.h.
Referenced by SX1262_SetStandby().
| #define SX1262_OPCODE_SET_TX 0x83 |
Definition at line 13 of file sx1262.h.
Referenced by SX1262_SetTx().
| #define SX1262_OPCODE_SET_PACKET_TYPE 0x8A |
Definition at line 14 of file sx1262.h.
Referenced by SX1262_SetPacketType().
| #define SX1262_OPCODE_SET_RF_FRECUENCY 0x86 |
Definition at line 15 of file sx1262.h.
Referenced by SX1262_SetRfFrequency().
| #define SX1262_OPCODE_SET_PA_CONFIG 0x95 |
Definition at line 16 of file sx1262.h.
Referenced by SX1262_SetPaConfig().
| #define SX1262_OPCODE_SET_TX_PARAMS 0x8E |
Definition at line 17 of file sx1262.h.
Referenced by SX1262_SetTxParams().
| #define SX1262_OPCODE_SET_BUFFER_BASE_ADDRESS 0x8F |
Definition at line 18 of file sx1262.h.
Referenced by SX1262_SetBufferBaseAddress().
| #define SX1262_OPCODE_WRITE_BUFFER 0x0E |
Definition at line 19 of file sx1262.h.
Referenced by SX1262_WriteBuffer().
| #define SX1262_OPCODE_SET_MODULATION_PARAMS 0x8B |
Definition at line 20 of file sx1262.h.
Referenced by SX1262_SetModulationParams().
| #define SX1262_OPCODE_SET_PACKET_PARAMS 0x8C |
Definition at line 21 of file sx1262.h.
Referenced by SX1262_SetPacketParams().
| #define SX1262_OPCODE_SET_DIO_IRQ_PARAMS 0x08 |
Definition at line 22 of file sx1262.h.
Referenced by SX1262_SetDioIrqParams().
| #define SX1262_OPCODE_CLEAR_IRQ_STATUS 0x02 |
Definition at line 23 of file sx1262.h.
Referenced by SX1262_ClearIrqStatus().
| #define SX1262_OPCODE_CALIBRATE_IMAGE 0x98 |
Definition at line 24 of file sx1262.h.
Referenced by SX1262_CalibrateImage().
| #define SX1262_BUSY_PIN 4 |
Definition at line 26 of file sx1262.h.
Referenced by SX1262_WaitBusy().
| #define SX126X_DIO1_PIN 5 |
Definition at line 27 of file sx1262.h.
Referenced by SX1262_InitInterrupts().